Filter and de-dusting technology

Control unit of a de-dusting plant

The control of the filter equipment is maintained by a special control unit. The electronic control device is characterised by a number of advantages.

You will find detailed information about the filter and de-dusting solutions from Münstermann and NEOTECHNIK on a combined website: http://www.mn-filtration.com

Due to its intelligent electronic system the control unit is in a position to individually respond to varying operating conditions. It allows a differential-pressure dependent de-dusting of the filter equipment, which thus allows savings to be made on compressed air and energy, while still providing optimum de-dusting of the filter media. Since the unit individually adapts to the intervals between the de-dusting impulses, which depend on the volume of dust accumulating, the filter equipment is therefore always operated along the optimum operating curve.

All status and error messages of discharge components, the blower and the compressor are displayed online on the control unit via a LED display in addition to a differential pressure display. The device is not only capable of providing optimum operation of filter equipment from Münstermann but may also be used with equipment from all other filter brands. This can be of major benefit in the upgrading of filter equipment.